User Manual
APN Edit
Version 2.1
APN(Access Point Name) is a gateway between a cellular network and Internet. On this page, you can setup and save the APN profile of public and private networks.
Currently, most public network APNs are configured for NSA (Non-Standalone) mode, while the majority of private networks are configured for SA (Standalone) mode.
However, there are some private networks that also have NSA configuration.
Notification:
APN Edit page is only for configuring the APN Quick Select file.
To Apply the changes, you need to go to the APN settings page.
Setup Private Network APN
-
Step 1. Go to Networking > Mobile Network page
-
Step 2. Click “Setting” button and pop-up “Setting” dialog box.
-
Step 3. Quick Select ”Not Select” in drop‑down menu.
-
Step 4. Select “SA” in drop‑down menu.
-
Step 5. Type Field Name.
-
Step 6. Click “Add APN” button to Add multiple APNs
-
Step 7. Type APN Name.
-
Step 8. Type Username(if needed).
-
Step 9. Type Password(if needed).
-
Step 10. Type Auth type (if needed).
-
Step 11. Click ”Add” button. Profile will save in Quick Select drop-down menu.
Setup NSA APN
-
Step 1. Go to Networking > Mobile Network page
-
Step 2. Click “Setting” button and pop-up “Setting” dialog box.
-
Step 3. Quick Select ”Not Select” in drop‑down menu.
-
Step 4. Select “NSA” in drop‑down menu.
-
Step 5. Type Field Name.
-
Step 6. Click “Add APN” button to Add multiple APNs
-
Step 7. Type APN Name.
-
Step 8. Type Username(if needed).
-
Step 9. Type Password(if needed).
-
Step 10. Type Auth type (if needed).
-
Step 11. Click ”Add” button. Profile will save in Quick Select drop-down menu.
