User Manual

Name	Description
Server Port	The server port for server to listen on and client to connect to. The server port should be same in both client and server. Default is 5201.
Report Interval	How often the reporting is triggered by setup report interval option. Default time unit for work is 1 second but you can change it to be minutes or hours.

Name	Description
Server Address	Type server IP address that connects to an iPerf server running on host.
Server Port	The server port for server to listen on and client to connect to. The server port should be same in both client and server. Default is 5201.
Protocol	Choose protocol type TCP or UDP. If choose UDP protocol, it would need to more setting for bandwidth and packet size.
Interface	Support use iPerf by different WAN interfaces.
UDP Bandwidth	Setup target bandwidth, default 128 KB/sec for UDP, unlimited for TCP.
UDP Packet Size	Setup target UDP packet size, default 1470 bytes.
Transmit Mode	Support Upload or Download.
Test Duration	Execute iPerf in time duration. Default is 10 seconds.
Streams	Execute iPerf with multiple streams for network performance measurement.
Report Interval	How often the reporting is triggered by setup report interval option. Default time unit for work is 1 second but you can change it to be minutes or hours.

iPerf Version 2.1