NAT
Version 2.1
NAT is Network Address Translation.
Create NAT rule to communicate with public and private Network. If interface port type is defined as WAN, it creates subnet connection with Internet by NAT rule.
When NAT rule is created with WAN interface, WAN interface port type has been changed to LAN and NAT rule will be deleted automatically.
Setup NAT Rule.
-
Setp1. Setup NAT rule.
-
Step 2. Go to Networking > WAN > NAT page.
-
Step 3. Click “Add” button.
-
Step 4. Type Source Subnet 192.168.0.0/24.
-
Step 5. Type Description.
-
Step 6. Select Mobile Network as Interface.
-
Step 7. Click “Apply” button.
Cheetah mode default is enabled to enhance upload and download throughput. Depend on your network environment, the specific factor will downgrade the throughput. In the situation, please disable it.